top of page
LANCE LOGO

4225 w. ogden ave, chicago il, 60532

3060 s. calhoun rd, new berlin wisconsin, 53151

LANCE CONSTRUCTION SUPPLIES

SIKA
17.6 GAL

SIKALASTIC 745 

SIKA 745 AL
SIKA
20 GAL

SIKALASTIC 720 

SIKA 720
SIKA
5 GAL

SIKALASTIC 200 

SIKALASTIC 220
SIKA
5 GAL

SIKALASTIC 225 

SIKALASTIC 225 TOP COAT
PROSOCO
1 GAL

SALTGAURD WB

PROSOCO SALTGUARD WB
5 GAL
PROSOCO
5 GAL

SILOXANE PD

PROSOCO SILOXANE PD
W.R. MEADOWS

MEL-ROL LO-TEMP

W.R. MEADOWS MEL ROL
38-1/2"X60'
W.R. MEADOWS

MEL-ROL

W.R. MEADOWS MEL ROL
38-1/2"X60'
W.R. MEADOWS

SEAL MASTIC TYPE 2

W.R. MEADOWS SEAL MASTIC TYPE 2
5 GAL
W.R. MEADOWS
5 GAL

HYDROLASTIC 836

W.R. MEADOWS 836
EVONIK
5 GAL

40 VOC

EVONIK VOC 40
EVONIK
5 GAL

BSM-400

EVONIK BSM400
EVONIK
5 GAL

PB-100

EVONIK PB100
W.R. MEADOWS
20 Oz.

PC-2

W.R. MEADOWS PROTECTION COURSE
HENRY
3'X66.67'

BLUESKIN WP200

HENRY WP 200
PB 100.jpg
PB 100.jpg
PB 100.jpg
EVONIK PB100

PB-100

EVONIK
5 GAL

A clear, penetrating, breathable water repellent for use on exterior above-grade concrete masonry units, brick masonry and most natural stones. Provides resistance against water, alkali attack, acid rain. Penetrates into the substrate and chemically bonds with silica to forma permanent attachment of the water repellent molecule. Protectosil CHEM-TRETEPB100 is especially suited for making porous substrates such as split-face block water repellent. This water repellent effect stands up against wind-driven rain.

55 GAL
bsm 400_edited.jpg
bsm 400_edited.jpg
bsm 400_edited.jpg
EVONIK BSM400
EVONIK

BSM-400

5 GAL
55 GAL

Protectosil® CHEM-TRETE® BSM 400 is a water repellent can be applied in the most extreme temperature conditions without changing the surface appearance of the substrate. By penetrating the surface and creating a chemical bond, Protectosil® CHEM-TRETE® BSM 400 permanently attaches to the substrate. It is ideal for use on exterior above-grade brick masonry, concrete and most natural stones.

40 VOC PIC.jpg
40 VOC PIC.jpg
40 VOC PIC.jpg
EVONIK VOC 40
5 Gal.
EVONIK

40 VOC

Protectosil® CHEM-TRETE® 40 VOC is a clear, penetrating, breathable water repellent for use on exterior above-grade concrete, brick masonry, concrete masonry units and some natural stones. This product penetrates the surface to chemically bond to the substrate, resulting in a permanent attachment of the water repellent molecule.

55 Gal.
SILOXANE PD.jpg
PROSOCO_edited.png
SILOXANE PD.jpg
PROSOCO SILOXANE PD

SILOXANE PD

PROSCO
5 GAL

Sure Klean® Weather Seal Siloxane PD (predilute) is a ready-to-use, water-based silane/siloxane water repellent for concrete and most masonry and stucco surfaces. Siloxane PD will not impair the natural breathing characteristics of treated surfaces. It helps masonry resist cracking, spalling, staining and other damage related to water intrusion. Low odor and alkaline stable, Siloxane PD is ideal for field and in-plant application.

SaltGuard-WB-1-Gal (1).jpg
PROSOCO_edited.png
SaltGuard-WB-1-Gal (1).jpg
PROSOCO SALTGUARD WB

PROSCO

SALTGAURD WB

1 GAL

Saltguard WB is a water-based, ready-to-use, VOC-compliant silane/siloxane water repellent and chloride screen for the protection of concrete and masonry. Low-odor and alkaline-stable, Saltguard WB is ideal for field or in-plant application to concrete and most masonry.

5 GAL
SEAL MASTIC PIC TYPE 2_edited.jpg
SEAL MASTIC PIC TYPE 2_edited.jpg
SEAL MASTIC PIC TYPE 2_edited.jpg
W.R. MEADOWS SEAL MASTIC TYPE 2
W.R. MEADOWS

SEALMASTIC TYPE2

5 GAL

SEALMASTIC TYPE II (brush-on/spray-grade) is an asphalt-based, clay emulsion with fibers specifically formulated to offer a tight film that combines both excellent strength and resistance to water.

MEL ROL PIC_edited.jpg
WR_edited.png
MEL ROL PIC_edited.jpg
W.R. MEADOWS MEL ROL

W.R. MEADOWS

MEL-ROL LO-TEMP

38-1/2"X60'

MEL-ROL LOW TEMP is a flexible, roll-type, waterproofing membrane, ideal for use in cold temperature applications. It is composed of a nominally 56-mil thick layer of polymeric waterproofing membrane formulated for maximum adhesion at lower temperatures on a heavy-duty, four-mil thick, cross-laminated polyethylene carrier film. The two components are laminated together under strict quality-controlled production procedures.

MEL ROL PIC_edited.jpg
MEL ROL PIC_edited.jpg
MEL ROL PIC_edited.jpg
W.R. MEADOWS MEL ROL

W.R. MEADOWS

MEL-ROL

38-1/2"X60'

MEL-ROL waterproofing system is a flexible, versatile, dependable, bituminous, roll-type waterproofing membrane. It is a 60 mil-membrane composed of a nominally 56 mil thick layer of polymeric waterproofing membrane on a heavy duty, four-mil thick, cross-laminated polyethylene carrier film. The two components are laminated together under strict quality-controlled production procedures.

836 PIC_edited.jpg
WR_edited.png
836 PIC_edited.jpg
W.R. MEADOWS 836
W.R. MEADOWS

HYDRALASTIC 836

5 GAL

HYDRALASTIC 836 is a cold-applied, solvent-free, single component waterproofing compound. It does not shrink, has a low volatile organic compound (VOC) content, and has a very low odor.

wr-meadows-protection-course-pc-2-and-pc-3-4x8-sheet__29747.jpg
WR_edited.png
wr-meadows-protection-course-pc-2-and-pc-3-4x8-sheet__29747.jpg
W.R. MEADOWS PROTECTION COURSE 2
W.R. MEADOWS

 PROTECTION COURSE will absorb the impact of aggregate shock and normal jobsite foot traffic. It also protects the membrane waterproofing from penetration by sharp aggregate during backfilling and later settlement.

PC-2

4'X8'

WP200 PIC.webp
WP200 PIC.webp
WP200 PIC.webp
HENRY WP200
HENRY
3'X66.7'

BLUESKIN WP200

Henry Blueskin WP200 self-adhered waterproofing membrane provides a high-performance waterproofing barrier for post-applied construction. Blueskin WP200 fully adheres to the substrate and eliminates water migration between the membrane and the  waterproofed surface.

us-02-745-AL-01-1x1-00983183.jpg
SIKA_edited.png
us-02-745-AL-01-1x1-00983183.jpg
SIKA 745 AL

SIKALASTIC 745

SIKA
20 GAL

Sikalastic®-745 AL is a two-component, aliphatic, chemically cured, elastomeric polyurethane coating intended for use as the traffic bearing wear and top coat over polyurethane waterproofing membrane for pedestrian and vehicular traffic bearing applications, and as a protective top coat over polyurethane waterproofing membrane under a separate wearing course such as concrete or asphalt pavement, and tile in a setting bed.

SIKA 726 PIC.jpg
SIKA 726 PIC.jpg
SIKA 726 PIC.jpg
SIKA 726

SIKALASTIC 726

SIKA

Sikalastic®-726 Balcony One Shot is a two-component, aliphatic, chemically cured, elastomeric polyurethane waterproofing coating system that has both superior flexibility and abrasion resistance. Easily applied in a single coat with or without primer and designed for pedestrian traffic specifically balcony waterproofing applications.

us-02-720-Base-Part-A-and-B-01-1x1-00179090.jpg
SIKA_edited.png
us-02-720-Base-Part-A-and-B-01-1x1-00179090.jpg
SIKA 720

SIKALASTIC 720

SIKA
20 GAL

Sikalastic®-720 Base is a two-component, aromatic, chemically cured, elastomeric polyurethane coating intended for use as the waterproofing base coat under polyurethane or epoxy wearing surfaces for pedestrian and vehicular traffic bearing applications, and as the waterproofing base coat under a separate wearing course such as concrete or asphalt pavement, and tile in a setting bed.

sikalastic-tc225-new-lg.jpg
SIKA_edited.png
sikalastic-tc225-new-lg.jpg
SIKALASTIC 225 TOP COAT

SIKALASTIC 225

SIKA
5 GAL

Sikalastic® TC 225 HT is a moisture-curing polyurethane top coat for use in Sikalastic® Traffic 1500 deck coating systems. The Sikalastic® TC 225 HT is a one-component waterproofing coating and is UV-resistant. The Sikalastic® TC 225 HT Tint Base product allows for a variety of colors in pedestrian applications.

bottom of page