4225 w. ogden ave, chicago il, 60532
3060 s. calhoun rd, new berlin wisconsin, 53151
LANCE CONSTRUCTION SUPPLIES
_image.jpg)
3M
FD150+
20 Oz.
3M™ Fire Barrier Sealant FD 150+ firestops joints and through penetrations through floor slabs, walls and other fire-rated building partitions and assemblies. 3M™ Fire Barrier Sealant FD 150+, when properly installed, helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire.
GCP
PERM-A-BARRIER
5 GAL
PERM-A-BARRIER® WB Primer is a water-based primer which imparts an aggressive, high tack finish on the treated substrate. It is specifically designed to facilitate tenacious adhesion of PERM-A-BARRIER® Flashings, PERM-A-BARRIER® Detail Membrane and PERM-A-BARRIER® Wall Membrane to various substrate including glass-mat faced gypsum sheathing.
OSI
QB 300
30 Oz.
OSI® QB-300 Multi-Purpose Construction Adhesive is specially designed for the bonding and installation of most types of plastic foam panels including extruded polystyrene (XPS) foam insulation, expanded polystyrene (EPS) foam insulation, and polyisocyanurate known as Polyiso (PIR) foam insulation. Will not attack polystyrene foam when used as directed.
SIKA
2C NS EZ MIX
1.5 GAL
Sikaflex®-2c NS EZ Mix is a 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a non-sag consistency. Meets ASTM C 920, Type M, Grade NS, Class 25, use T, NT, M, G, A, O, I and Federal specification TT-S-00227E, Type II, Class A. Meets Canada Standard CAN/CGSB 19.24 - M90.
SIKA
2C NS EZ MIX +
1.5 GAL
Sikaflex®-2c NS EZ Mix+ is a 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a non-sag consistency. Meets ASTM C920, Type M, Grade NS, Class 50, Use T, NT, M, A, O, I and Federal specification TT-S-00227 E, Type II, Class A. Meets Canada Standard CAN/CGSB 19.24 - M90.
SIKA
SIKA 1A
10 Oz.
Sikaflex®-1A is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Sikaflex-1a can be used in green and damp concrete applications. Meets Federal Specification TT-S-00230C, Type II, Class A. Meets ASTM C920, Type S, Grade NS, Class 35, Use T, NT, O, M, A, I. Canadian standard CAN/CGSB 19.13-M87.
STEGO
STEGO MASTIC
5 GAL
Stego Mastic is a liquid-applied vapor retardant membrane, designed to be used in conjunction with Stego Wrap vapor barriers and retarders to create a quality installation that greatly resists the ingress of moisture and other gases. It can be used for sealing utility, pipe penetrations, and terminating edges when used in conjunction with Stego Tape or StegoTack Tape.
SIKA
SIKALASTIC PRIMER
5 GAL
Sikalastic® Primer is cold applied, single component, low-VOC, moisture-curing polyurethane primer. It is designed for sealing cementitious substrate to reduce the incidence of outgassing. For use as a primer under Sikalastic Traffic & Waterproofing Systems on concrete, plywood, select metals and existing PU coatings.
US-100
YORK
30 Oz.
UniverSeal US-100 LIQUID TAPE is a polyether-based, moisture-curing, elastomeric sealant. It forms a seamless, monolithic exterior working surface that will keep the structure watertight. Its distinctive blue color allows for quick & easy visual verification that all seams and gaps have been effectively sealed from wind and rain.
SIKA
SIKA 15LM
20 Oz.
Sikaflex®-15 LM is a low-modulus, high-performance, 1- component, polyurethane-based, non-sag elastomeric sealant. Meets Federal Specification TT-S-00230C, Type II, Class A; ASTM C-920, Type S, Grade NS, Class 100/50, use T, NT, G, A, O, M; Federal Specification for silicones - TT-S-001543 A, Type non-sag. Tested in accordance with ASTM C-1382 for use in EIFS systems.
SIKA
SIKA 1A
20 Oz.
Sikaflex®-1A is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Sikaflex-1a can be used in green and damp concrete applications. Meets Federal Specification TT-S-00230C, Type II, Class A. Meets ASTM C920, Type S, Grade NS, Class 35, Use T, NT, O, M, A, I. Canadian standard CAN/CGSB 19.13-M87.
W.R. MEADOWS
MEL PRIME
1 GAL
5 GAL
Apply MEL-PRIME W/B to simultaneously prepare and dustproof new, existing, vertical, and horizontal surfaces in one easy, economical operation. MEL-PRIME W/B is designed to condition surfaces that receive waterproofing and air and vapor barrier products from W. R. MEADOWS. Use MEL-PRIME W/B to condition all concrete surfaces to receive applications of MEL-DEK™, MEL-ROL®, and/or AIR-SHIELD™ from W. R. MEADOWS.
.jpg)
.jpg)
.jpg)
W.R. MEADOWS
POINTING MASTIC
30 Oz.
POINTING MASTIC can be used on all patches and overlaps in detail areas. It offers excellent cohesive and adhesive qualities when applied to structural concrete, masonry, and/or wood. Once applied, it provides excellent adhesive and bonding strengths. POINTING MASTIC cures to form a tough, flexible membrane.
.jpg)
QUART
H&B
HB SEALANT
HB SEALANT is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where joint movement requires compression and extension in excess of 25%.
The HB Sealant is an accessory to H&B's non-asphaltic flashing lines. It is used primarily for lapping and sealing flashings, drip edges, terminations, and end dams, particularly in areas where moisture is likely to be a factor.
SIKA
NP1 SAUSAGE
20 Oz.
Sikaflex® NP 1 is a one-component, high-performance, non-priming, gun-grade, elastomeric polyurethane sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry. Used as an acoustical sealant, Sikaflex® NP 1 reduces sound transmission in partition systems to support high STC values by sealing spaces around cut-outs and at perimeters of partitions. The sealant cures to a tough rubber to form a long-lasting acoustical seal.
DUPONT
GREAT STUFF PRO
24 Oz.
Use Great Stuff Pro Gaps & Cracks 24 oz. Insulating Foam Sealant to insulate and seal cracks & openings up to 3 in. This will help prevent unwanted drafts, moisture and insects. It is designed to be applied with a foam gun. Creates a long-lasting, water-resistant and fireblock seal around plumbing and electrical, in basements, attics, and more.
MORTAR NET
10.3 Oz.
BTL-1 SEALANT
BTL-1 is a synthetic rubber sealant that is ideal for most construction applications. It produces high-performance joints with both high strength and elasticity. BTL-1 bonds aggressively to steel, aluminum, ceramics, wood, Kynar® -coated metal, glass, fiberglass and many plastics.
HENRY
20Oz.
925 BES SEALANT
Henry 925 BES Sealant is a premium, one-part, low VOC, moisture cure, building envelope sealant for construction joints subject to dynamic joint movement. Provides excellent weathering resistance, flexibility, and very low VOC through the use of a silyl-terminated polyether polymer (STPE).
HENRY
212 SEALANT
10 Oz.
212 All Purpose Crystal Clear Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility. It is non-staining, non-sagging and skins over, tack free within 30 minutes.
.jpg)
HENRY
BLUESKIN ADHESIVE
4.5 GAL
Henry® Blueskin® LVC Adhesive is a quick drying, lower volatile organic compound (VOC) formulation, rubber-based adhesive designed to enhance the adhesion of self-adhered membranes such as Blueskin SA, Blueskin VP160, Blueskin TWF, Blueskin WP200, Metal Clad® 705FR, CCW-705, CCW-705 TWF, and MiraDRI 860/861. Blueskin® LVC Adhesive can also be used as a bonding adhesive and splicing cement for Henry Neoprene Flashing.
10 Oz.
SURE-SEAL
CARLISLE
Sure-Seal Lap Sealant is designed for sealing splice edges of cured Sure-
Seal (black) EPDM. Sure-Seal Lap Sealant is a heavy bodied trowel or gun
consistency material, designed to be used in conjunction with roofi ng and
waterproofi ng system materials. It is primarily used to seal the exposed
edges of rubber membrane splices.
20 Oz.
BARRIBOND HP
CARLISLE
BarriBond HP is a high-performance, silane-terminated polyether (STPE) based compound designed for use in joints, terminations, openings, and other details in CCW Air Barrier Systems. BarriBond HP is a single-component, moisture-cured adhesive/sealant which is applied from a sausage caulking gun, then spread and shaped with a trowel, squeegee, or other tool.
.jpg)
IPCO
IPCO PRIMER
1 GAL
The IPCO Flashing Primer is a rubber based adhesive in a solvent solution, specially formulated to provide superior adhesion with IPCO Rubberized Asphalt Flashing under varied surface conditions. It is an integral part of the IPCO Flashing System and should be used on all surfaces to which IPCO Rubberized Asphalt will be adhered. IPCO Flashing primer is red in color
5 GAL
.jpg)
SIKA
SIKA 15LM
10 Oz.
Sikaflex®-15 LM is a low-modulus, high-performance, 1- component, polyurethane-based, non-sag elastomeric sealant. Meets Federal Specification TT-S-00230C, Type II, Class A; ASTM C-920, Type S, Grade NS, Class 100/50, use T, NT, G, A, O, M; Federal Specification for silicones - TT-S-001543 A, Type non-sag. Tested in accordance with ASTM C-1382 for use in EIFS systems.
NP1 CARTRIEDGE
SIKA
10 Oz.
Sikaflex® NP 1 is a one-component, high-performance, non-priming, gun-grade, elastomeric polyurethane sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry. Used as an acoustical sealant, Sikaflex® NP 1 reduces sound transmission in partition systems to support high STC values by sealing spaces around cut-outs and at perimeters of partitions. The sealant cures to a tough rubber to form a long-lasting acoustical seal.
.jpg)
.jpg)
