top of page
lance_edited_edited_edited.png

4225 w. ogden ave, chicago il, 60532

3060 s. calhoun rd, new berlin wisconsin, 53151

LANCE CONSTRUCTION SUPPLIES

WIRE BOND

 SERIES 200 LADDER WIRE 

ladder 2 wire piece (1) (1).jpg
10'
8'
WIRE BOND

SERIES 300 TRUSS WIRE

TRUSS 9 GA PIC (1).jpg
WIRE BOND

SERIES 800 LADDER WIRE 

SERIES 800 LADDER PIC (1).jpg
8'
10'
WIRE BOND

SERIES 900 TRUSS WIRE

SERIES 900 PIC (1).jpg
WIRE BOND

WELD ON ANCHOR

WELD ON ANCHOR PIC (1).jpg
1/4"X9"
WIRE BOND

RJ711

RJ711 PIC (1).jpg
WIRE BOND

HCL711

HCL711 PIC (1).jpg
WIRE BOND

SURETIE WIDESLOT

SURETIE WS PIC (1).jpg
WIRE BOND

SINGLE REBAR POSITIONER

SINGLE REBAR POSITIONER (1).jpg
WIRE BOND

DOUBLE REBAR POSITIONER

DOUBLE REBAR POSTIONER (1).jpg
WIRE BOND

PTA 4301

4301 PTA PIC (1).jpg
WIRE BOND

DOVETAIL SLOT

DOVETAIL SLOT PIC (1).jpg
WIRE BOND

DOUBLE HOOK PINTLE

DOUBLE HOOK PINTLE PIC (1).jpg
3/16"
WIRE BOND

PLUMB-RITE

plumb-rite PIC (1).jpg
10'
WIRE BOND

PVC SEISMIC CLIP

PVC SEISMIC CLIP PIC (1).jpg
WIRE BOND

CELL VENT

CELL VENT PIC (1).jpg
SERIES 800 LADDER PIC (1).jpg
SERIES 800 LADDER PIC (1).jpg
SERIES 800 LADDER PIC (1).jpg
SERIES 800 LADDER PIC (1).jpg
WIRE BOND

800 LADDER WIRE

8'

​

  • Eyes are double welded on to side wires to provide maximum strength and durability.

  • Level Eyes make it easier to maintain 3/8″ mortar joint.

  • Allows use of 3/16″ side rods.

  • Eliminates weld points that are too thick.

  • Meets ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcing).

10'
SERIES 800 LADDER PIC (1).jpg
SERIES 800 LADDER PIC (1).jpg
SERIES 800 LADDER PIC (1).jpg
SERIES 800 LADDER PIC (1).jpg
WIRE BOND

800 LADDER WIRE

8'

​

  • Eyes are double welded on to side wires to provide maximum strength and durability.

  • Level Eyes make it easier to maintain 3/8″ mortar joint.

  • Allows use of 3/16″ side rods.

  • Eliminates weld points that are too thick.

  • Meets ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcing).

10'
ladder 2 wire piece (1) (1).jpg
ladder 2 wire piece (1) (1).jpg
ladder 2 wire piece (1) (1).jpg
ladder 2 wire piece (1) (1).jpg
WIRE BOND
10'

200 LADDER WIRE

​

Ladder Series 200 design is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry. It is manufactured in 10′ 8″ lengths from wire conforming to ASTM A1064/A1064M

8'
H&B

FLEX FLASH

FLEXFLASH PIC.jpg
75'
TRUSS 9 GA PIC (1).jpg
TRUSS 9 GA PIC (1).jpg
TRUSS 9 GA PIC (1).jpg
TRUSS 9 GA PIC (1).jpg
WIRE BOND

300 TRUSS WIRE 

Truss design is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry.

​

SERIES 900 PIC (1).jpg
SERIES 900 PIC (1).jpg
SERIES 900 PIC (1).jpg
SERIES 900 PIC (1).jpg
WIRE BOND

SERIES 900 TRUSS 

Truss Style Adjustable Joint Reinforcement with "Lollipop" style Eyelets and Pintles. Level Eye Truss® is manufactured with double eyes welded 16" O.C. Out-to-out spacing of longitudinal wires and is approximately 2" less than the nominal thickness of the block.

​

WELD ON ANCHOR PIC (1).jpg
WELD ON ANCHOR PIC (1).jpg
WELD ON ANCHOR PIC (1).jpg
WELD ON ANCHOR PIC (1).jpg
WIRE BOND

WELD ON ANCHOR

1/4" X 9"

The Type I Weld On #1000 is designed to anchor masonry to structural steel columns or beams. Type I is used with the 1100 Series Triangle Ties or the 1200 Beam Tie.

​

RJ711 PIC (1).jpg
RJ711 PIC (1).jpg
RJ711 PIC (1).jpg
RJ711 PIC (1).jpg
14GA
WIRE BOND

RJ711

HOT DIPPED

RJ 711 adjustable veneer anchor (#2401) with a 3/16" dia. pintle (#2402) meets the Brick Institute of America’s requirement of a maximum deflection of less than .05 inches (1.2mm) when tested at an axial load of 100 pounds in tension and compression.

​

HCL711 PIC (1).jpg
HCL711 PIC (1).jpg
HCL711 PIC (1).jpg
HCL711 PIC (1).jpg
14GA
WIRE BOND

HCL711

HOT DIPPED

The HCL 711 (#2411 plate) and (#2402 pintle) Anchoring system installs quickly and easily on exterior walls with brick veneer while providing positive contact with metal stud and avoiding damage to wallboard. The HCL 711 System moves the dew point from within the stud to near the outer face of the rigid insulation, reducing potential corrosion at the screw locations.

​

SURETIE WS PIC (1).jpg
SURETIE WS PIC (1).jpg
SURETIE WS PIC (1).jpg
SURETIE WS PIC (1).jpg
WIRE BOND

SURETIE WS 

SureTie WS (#4522) is designed with a wide slot for easier installation. SureTie WS quickly and accurately pierces insulation and/or wallboard to abut with steel studs in brick veneer applications.

​

SURETIE PINTLE 2_edited_edited_edited.png
SURETIE PINTLE 2_edited_edited_edited.png
SURETIE PINTLE 2_edited_edited_edited.png
SURETIE PINTLE 2_edited_edited.jpg
3/16" DIA
WIRE BOND

SURETIE PINTLE

Designed with a Wide Slot to accept the #4515 SureTie WS Adjustable Double Hook

​

WEEP W WICK PIC.webp
WEEP W WICK PIC.webp
WEEP W WICK PIC.webp
WEEP W WICK PIC.webp
WIRE BOND

WEEP WICK TUBE

Weep holes provide a gap that permits drainage for moisture from the back of the wall by penetration, capillary action, or leakage.

​

round-weep-holes_edited_edited.png
round-weep-holes_edited_edited.png
round-weep-holes_edited_edited.png
round-weep-holes.jpg
WIRE BOND

WEEP TUBE

Weep holes provide a gap that permits drainage for moisture from the back of the wall by penetration, capillary action, or leakage.

​

DOUBLE HOOK PINTLE PIC (1).jpg
DOUBLE HOOK PINTLE PIC (1).jpg
DOUBLE HOOK PINTLE PIC (1).jpg
DOUBLE HOOK PINTLE PIC (1).jpg
PINTLE
WIRE BOND

DOUBLE HOOK 

3/16"

​

SINGLE REBAR POSITIONER (1).jpg
SINGLE REBAR POSITIONER (1).jpg
SINGLE REBAR POSITIONER (1).jpg
SINGLE REBAR POSITIONER (1).jpg
SINGLE
WIRE BOND

REBAR POSITIONER

#3410 Core Lock 12" and 16"Single Rebar Positioner is installed 1-1/4" deep into the CMU instead of on top of the block.

​

DOUBLE REBAR POSTIONER (1).jpg
DOUBLE REBAR POSTIONER (1).jpg
DOUBLE REBAR POSTIONER (1).jpg
DOUBLE REBAR POSTIONER (1).jpg
DOUBLE
WIRE BOND

REBAR POSITIONER

#3411 Core 12 or 16" Double Rebar Positioner is installed 1-1/4" deep into the CMU instead of on top of the block.

​

4301 PTA PIC (1).jpg
4301 PTA PIC (1).jpg
4301 PTA PIC (1).jpg
4301 PTA PIC (1).jpg
WIRE BOND

PTA 4301

  • Permits vertical movement of the slab above, without transferring compression loads to the wall below.

  • PTA tube with expansion filler is placed over the anchor to allow deflection.

  • Joint is filled with mortar, fully surrounding the tube.

​

DOVETAIL SLOT PIC (1).jpg
DOVETAIL SLOT PIC (1).jpg
DOVETAIL SLOT PIC (1).jpg
DOVETAIL SLOT PIC (1).jpg
WIRE BOND

DOVETAIL SLOT

The #1304 Dovetail Slot is used to anchor masonry to concrete with the #2102 dovetail triangle or with the #2200 Dovetail Corrugated Tie.​

​

plumb-rite PIC (1).jpg
plumb-rite PIC (1).jpg
plumb-rite PIC (1).jpg
plumb-rite PIC (1).jpg
10'
WIRE BOND

PLUMB-RITE

Plumb-Rite is a T-shaped PVC product that assists in keeping vertical joints in precise alignment where control joints and expansion joints are used in a masonry wall. Once Plumb Rite is installed, it isn't necessary to plumb joint again

​

PVC SEISMIC CLIP PIC (1).jpg
PVC SEISMIC CLIP PIC (1).jpg
PVC SEISMIC CLIP PIC (1).jpg
PVC SEISMIC CLIP PIC (1).jpg
5/16"X1-1/2"X1-3/4"
WIRE BOND

PVC SEISMIC CLIP

#3690 Plastic Seismic Clip (PSC) accepts both 9 gauge and 3/16" diameter continuous seismic wire. Can be used in any adjustable system consisting of a pintle or triangle and horizontal joint reinforcing wire.

​

CELL VENT PIC (1).jpg
CELL VENT PIC (1).jpg
CELL VENT PIC (1).jpg
CELL VENT PIC (1).jpg
WIRE BOND

CELL VENT

#3601 Cell Vent (ultra violet resistant polypropylene co-polymer), consists of many small, adjacent passageways bonded together in one unit.

​

ANCHORSEAL GASTKET PIC.webp
ANCHORSEAL GASTKET PIC.webp
ANCHORSEAL GASTKET PIC.webp
ANCHORSEAL GASTKET PIC.webp
50'
WIRE BOND

ANCHORSEAL TAPE

Anchorseal Tape (#4110) is a 40 mil thick dual barrier membrane consisting of 32 mills of pliable, highly adhesive rubberized asphalt, completely and integrally bonded to an 8 mil, high density, cross-laminated polyethylene film.

​

bottom of page