4225 w. ogden ave, chicago il, 60532
3060 s. calhoun rd, new berlin wisconsin, 53151
LANCE CONSTRUCTION SUPPLIES
.jpg)
HENRY
METAL CLAD 705FR
Metal Clad 705FR is a self-adhered water-resistive air barrier membrane comprised of rubberized asphalt and dual layers of high-strength polyethylene with a surface layer of metallic aluminum film. Due to its metallic surfacing, Metal Clad 705FR exhibits excellent weathering and burn resistance when applied to above-grade wall assemblies.
HENRY
BUTYL FLASH
Blueskin Butyl Flash is designed for use as a concealed self-adhered flashing against water, air, and moisture infiltration. Commonly used to provide a weather-tight seal around fenestrations, joints in the sheathing, and as a general flashing in residential and commercial construction.
HENRY
20Oz.
AIR BLOC LF
Air-Bloc LF is a moisture cure single-component elastomeric liquid-applied flashing using a highly advanced Silyl-Terminated Polyether (STPE) polymer. It is designed to cure through reaction with airborne moisture to provide a heavy-duty seamless rubber-like impervious membrane with excellent weathering and water resistance.
HENRY
AIR-BLOC 16MR
5 Gal.
Henry® Air-Bloc® 16MR is a fluid applied, vapor impermeable air and water barrier when applied to above-grade wall assemblies. It is single-component, water-based and cures to a tough monolithic rubber-like membrane, which resists air leakage and water penetration. Air-Bloc® 16MR includes an antimicrobial technology to create an integral mold resistant membrane, and offers a broad application temperature range with a proprietary fire resistance technology to achieve compliance with stringent NFPA 285 requirements.
55 Gal.
HENRY
AIR-BLOC 17MR
5 Gal.
55 Gal.
Spray-, roll- or brush-applied, Henry’s Air-Bloc® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc® 17MR can be applied down to 20°F (-6°C). Air-Bloc® 17MR cures to a tough, monolithic rubber-like membrane.
HENRY
BLUESKIN SA LT
75'
Blueskin SA LT is a self-adhering membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue, engineered thermoplastic film. The membrane is specifically designed to be self-adhered to a prepared substrate, providing an air/vapor/water barrier in full wall applications or as penetration/flashing membrane with other air barrier systems.
HENRY
BLUESKIN VP160
100'
Henry® Blueskin® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical attachment.
W.R. MEADOWS
5 Gal.
AIR-SHIELD LSR
AIR-SHIELD LSR (liquid synthetic rubber) is an asphalt-free, single-component, synthetic rubber based liquid air/vapor and liquid moisture barrier. AIR-SHIELD LSR cures to form a tough, seamless, elastomeric membrane, which exhibits excellent resistance to air and moisture transmission.
55 Gal.
PROSCO
FAST FLASH
20 Oz.
FastFlash is a liquid flashing membrane available in gun or rollergrade. Use FastFlash in rough openings, to fill joints and seams, to counter-flash waterproofing and air barrier components in new or existing wall assemblies, and to seal around penetrations. Use FastFlash independently or with compatible R-Guard products to prevent the unwanted movement of water and air through building envelopes.
_edited.png)
W.R. MEADOWS
AIRSHIELD LM
5 GAL
A liquid-applied, water-based, polymer-modified air/vapor and liquid moisture barrier. AIR-SHIELD LM cures to form a tough, seamless, elastomeric membrane, which exhibits excellent resistance to air and moisture transmission. AIR-SHIELD LM is a water-based asphalt emulsion modified with a blend of synthetic polymers and special additives. The product can be applied in two ways – first, as a single-component product for spray and roller application. Secondly, the product can be applied as a co-spray, two-component material in combination with W. R. MEADOWS CURE-IT. Either method will achieve the required nominal 45 mils dry film thickness.
55 GAL
W.R. MEADOWS
AIRSHIELD LMP
5 GAL
AIR-SHIELD LMP is a water-based air/liquid moisture barrier that cures to form a tough, seamless, elastomeric membrane. AIR-SHIELD LMP exhibits excellent resistance to air leakage. When properly applied as a drainage plane, AIR-SHIELD LMP prohibits liquid water intrusion into the substrate.
W.R. MEADOWS
PRECON LO-TEMP
PRECON LOW TEMP is a composite sheet membrane comprised of a non-woven fabric, elastomeric membrane. The plasmatic core is a seven-layer matrix designed for toughness and provides the lowest water vapor transmission (WVT) rating on the market. Once concrete is poured against PRECON LOW TEMP and the concrete cures, a mechanical bond forms that secures the concrete to the membrane.
W.R. MEADOWS
AIRSHIELD SMP
59"X164'
AIR-SHIELD SMP is a self-adhering, vapor permeable, air/liquid moisture barrier that is designed to be fully bonded to the substrate without the use of an adhesive or primer. AIR-SHIELD SMP is a tough, durable membrane that exhibits excellent resistance to air leakage and liquid water intrusion, while at the same time allows vapor to readily pass through to allow the wall assembly to dry.
.jpg)
.jpg)
W.R. MEADOWS
AIR SHIELD LO TEMP
AIR-SHIELD LOW TEMP self-adhering air/vapor and liquid moisture barrier is part of a total W. R. MEADOWS system to complete the building envelope. It is a roll-type product that is nominally 40 mils thick and is ideal for cold weather applications. The membrane’s controlled thickness is fabricated from cross-laminated polyethylene bonded to specially modified asphalt and will adhere to most primed surfaces at minimum temperatures of 20˚ F (-7˚ C).
.jpg)
AIR SHIELD
AIR-SHIELD self-adhering air/vapor and liquid moisture barrier is part of a total W. R. MEADOWS system to complete the building envelope. It is a roll-type product that is nominally 40 mils thick. The membrane’s-controlled thickness is fabricated from cross-laminated polyethylene bonded to specially modified asphalt and will adhere to most primed surfaces at minimum temperatures of 40° F (4° C).
W.R. MEADOWS
IPCO
IPCO FLASHING
IPCO Flashing is provided in two thicknesses, 30mil and 40mil. The material consists of rubberized asphalt waterproofing laminated to a tough 4mil high-density, cross laminated polyethylene film. IPCO Flashing is applied by removing the release paper from the rubberized asphalt to expose the adhesive surface. The high-grade commercial adhesive of IPCO Flashing will adhere to virtually any backup wall material, including masonry, concrete and plywood, eliminating flashing blow-offs or tears. When overlapping flashing sections, this adhesive surface adheres firmly to the next section, forming a continuous moisture barrier within the cavity wall
H&B
ENVIROBARRIER VP
5 GAL
The reformulated ENVIRO-BARRIER™ VP is a single component, fluid applied, vapor permeable air and water barrier for above grade wall assemblies. It cures to form a resilient, monolithic, fully adhered elastomeric membrane, which resists air leakage and water penetration but allows vapor diffusion.
H&B
H&B's Textroflash™ Flashing is a thru-wall or surface-mounted flashing with a 40-mil thick composite membrane with a proprietary high-tack adhesive. This adhesive is factory-laminated to rugged, polyethylene sheeting, yielding a flexible membrane that is suitable for application to masonry, concrete, steel, gypsum and wood.
TEXTROFLASH
H&B
H&B's Flex-Flash® is a polyester scrim reinforced 40-mil thick product formulated with Elvaloy® Kee. It does not drool and combines the best features of other types of flashing, making it a truly superior product. Moisture infiltration can occur at sills, projections, recesses, intersections and mortar joints.
FLEX FLASH
YORK 304 SA
York 304 SA has been designed with a flexible 2 mil sheet of Type 304 stainless steel, butyl adhesive, and a siliconized release liner. York 304 SA is a self-adhering metal membrane that offers best-in-class puncture and tear resistance. It can be applied from 20˚ F to 170˚ F and stays stable and air-tight from -70˚ F to 250˚ F.
YORK
50'
DUPONT
GREAT STUFF PRO
24 Oz.
Use Great Stuff Pro Gaps & Cracks 24 oz. Insulating Foam Sealant to insulate and seal cracks & openings up to 3 in. This will help prevent unwanted drafts, moisture and insects. It is designed to be applied with a foam gun. Creates a long-lasting, water-resistant and fireblock seal around plumbing and electrical, in basements, attics, and more.
DUPONT
STRAIGHTFLASH
DuPont™ StraightFlash™ is an innovative, single-sided, self-adhered flashing solution that bridges the gap between the rough opening and building envelope to protect against water intrusion around heads and jambs of rectangular doors, windows and other gaps. By sealing vulnerable areas around openings, DuPont™ StraightFlash™ can help improve the durability and energy efficiency of both homes and commercial structures.
DUPONT
6"X75'
FLEXWRAP
DuPont™ FlexWrap™ self-adhered flashing does not require mechanical fasteners, even in flexed corner areas around building openings. This allows it to provide easy, one-step insulation for hard-to-seal corners around windows and doors. DuPont™ FlexWrap™ is designed to help protect vulnerable corners against air and water intrusion as part of a complete DuPont Building Envelope Solution. It’s effective across a range of window and door designs and a wide range of typical wall substrates, including OSB, plywood, gypsum, concrete masonry unit (CMU) and other non-nailable sheathing materials.
DUPONT
5 GAL
LIQUIDARMOR QS
DuPont™ LiquidArmor™ QS Flashing and Sealant is a quick-skinning, innovative liquid flashing solution designed to provide advanced moisture- and air-sealing protection to commercial buildings. A unique alternative to flashing tape, the elastomeric spray forms a tight, seamless barrier along the rough openings of windows and doors while helping to significantly reduce labor time.
.jpg)
CCW-705 Air & Vapor Barrier is a 40-mil-thick (0.040" inch) composite
membrane consisting of a rubberized-asphalt adhesive laminated to a
tough, dimensionally stable, smooth-surfaced poly fi lm. CCW-705 is
provided in rolls of various widths lined with disposable silicone-coated
plastic release fi lm. The release fi lm is removed to expose the adhesive as
the membrane is pressed in place. CCW-705 provides a complete barrier to
moisture and air when adhered to an above-grade substrate.
CCW 705
CARLISLE
5 GAL
BARRITECH NP
CARLISLE
50 GAL
Barritech NP is a fluid-applied membrane made of fire-retardent, synthetic polymer composition. Barritech NP is applied to exterior wall assemblies where it functions as an air barrier, vapor barrier and a water-resistive barrier. Barritech NP can be applied over concrete block, concrete, exterior gypsum sheathing, plywood, OSB and many other common building materials.
5 GAL
BARRITECH VP
CARLISLE
Barritech VP is a fluid-applied membrane made from inherently fireresistant materials. Barritech VP is applied to exterior wall assemblies where it functions as an air barrier and a water-resistive barrier. Barritech VP may be installed down to 20°F. Barritech VP is vapor-permeable — moisture vapor can diffuse directly through the membrane. Barritech VP can be applied over concrete block, concrete, exterior gypsum sheathing, plywood, OSB and many other common building materials.